Fused glass lamp Got a question? post it here
Junior Member 4 posts Ynysys Junior Member 4 posts
Ynysys
Hi I'm a glass artist and was wondering if you had any product that would hold a piece of glass and enable a light to be put behind it- hang from it - I think it's called a sconce???light fitting

Thanks
Quote 0 0
Richard Admin 85 posts
Richard
Hi do you have a picture at all, it will help us to get you the best advice.

Thanks
Follow and join us on facebook
or visit
lampspares logo   lia logo

Proud to be members of the Lighting Industry Association.


Please note that any advice is given with the best intentions but cannot be confirmed that this may be all that is required for your project. All electrical work must be carried out by a competent person and all work should be fully tested before use.
Quote 0 0
Ynysys Junior Member 4 posts
Ynysys
This is the sort of thing - although I'd mak the glass to fit the light. Or a feeling light fitting type thing with more bulb hang down

Thanks
Beryl
Quote 0 0
martin Admin 30 posts
martin
Hi Beryl
Im Martin and work at Lampspares with Richard.
We dont have anything like this im afraid but one suggestion would be to find a cheap wall mounted light from B&Q or Argos  etc and strip it down for the wall mounting bracket.
These brackets are almost certainly only made for the complete wall light.
The sconce you mentioned is a wall mounted light normally pointing upwards.
Sorry we couldn't help in this design but will always keep an eye out for a solution for you.
Martin
Follow and join us on facebook
or visit
[lampspares%20logo%20copied%20from%20site_zpsvhdwbxia]
Quote 0 0
Richard Admin 85 posts
Richard
Unless you can make some kind of enclosure/box that you can fix glass to then you can drill a hole in bottom/top/side/back etc for a cable entry then fit a lampholder inside.
The only issue is making/designing a box, as martin says may be easier and cheaper to buy a pre made light then modify it.
Unless you are after a custom look that would want to sell then maybe going to a metal fabricator to make a nice looking enclosure.

Hope you find an answer to your issue, if you have any questions please post here or call martin on 01903 776644
Follow and join us on facebook
or visit
lampspares logo   lia logo

Proud to be members of the Lighting Industry Association.


Please note that any advice is given with the best intentions but cannot be confirmed that this may be all that is required for your project. All electrical work must be carried out by a competent person and all work should be fully tested before use.
Quote 0 0