madkarter
can anyone recommend what size drill bit to use to core through the wooden base i'm going to use for lamp kit 8
Thanks
Quote 0 0
hobbsie
Hi and welcome to the forum, i have contacted martin as he will have the answer for you.
Quote 1 0
martin
Hi
The Brass wood nipple measures 9.5mm on the thread and as this is a course thread I guess a 8.5mm bit then wind the nipple into that. Best to do a test drill first if you can. The flex diameter is less than 6mm so if the 8.5mm is good for the nipple use that size for the complete length.
Hope this helps.
Follow and join us on facebook
or visit
[lampspares%20logo%20copied%20from%20site_zpsvhdwbxia]
Quote 1 0